StartseitePro PilotEZ PilotHöhenkontrolleFAQDokumentationKontakt

 

 

The EZ Pilot control unit is a square box with the dimensions shown above.  The 2.75" depth includes the 25 pin connector at the rear of the unit.  You should allow an additional 2-3 inches behind the control head for the cable connector and backshell that will plug into the unit.

Although the control head is square, it is designed to fit a standard 3-1/8 inch instrument cutout.  It is positioned at the rear of the panel and held in place by 4 ea #6-32 screws.

The servo assembly is placed where there is easy access to the aileron control torque tube.  The servo dimensions should be carefully considered before selecting a mounting location.

Click here for servo dimensional drawings